Design of Highway Bridges: An LRFD Approach - Hardcover

Über die Autorin bzw. den Autor

The late RICHARD M. BARKER, PhD, PE, was Professor Emeritus of Civil and Environmental Engineering at Virginia Polytechnic Institute and State ­University. Dr. Barker spent more than fifty years as a structural designer, project engineer, researcher, and teacher.

JAY A. PUCKETT, PhD, PE, is a Charles W. and Margre H. Durham Distinguished Professor and Director of The Durham School of Architectural Engineering and Construction at the University of Nebraska-Lincoln. Dr. ­Puckett is also an Emeritus Professor at the University of Wyoming and President of BridgeTech, Inc. in Laramie, WY, a consulting firm that specializes in software development for bridge engineering.

Von der hinteren Coverseite

The latest in bridge design and analysis―revised to reflect the Eighth Edition of the AASHTO LRFD specifications

Design of Highway Bridges: An LRFD Approach, Fourth Edition, offers up-to-date coverage of engineering fundamentals for the design of short- and medium-span bridges. Fully updated to incorporate the 8^th Edition of the AASHTO Load and Resistance Factor Design Specifications, this invaluable resource offers civil engineering students and practitioners a comprehensive introduction to the latest construction methods and materials in bridge design, including Accelerated Bridge Construction (ABC), Ultra-High Performance Concrete (UHPC), and Practical 3D Rigorous Analysis. This updated Fourth Edition offers:

• Dozens of end-of-chapter worked problems and design examples based on the latest AASHTO LRFD Specifications.
• Access to a Solutions Manual and multiple bridge plans including cast-in-place, precast concrete, and steel multi-span available on the Instructor’s companion website.

From gaining base knowledge of the AASHTO LRFD specifications to detailed guidance on highway bridge design, Design of Highway Bridges is the one-stop reference for civil engineering students and a key study resource for those seeking engineering licensure through the Principles and Practice of Engineering (PE) exam.

Aus dem Klappentext

The latest in bridge design and analysis—revised to reflect the Eighth Edition of the AASHTO LRFD specifications

Design of Highway Bridges: An LRFD Approach, Fourth Edition, offers up-to-date coverage of engineering fundamentals for the design of short- and medium-span bridges. Fully updated to incorporate the 8^th Edition of the AASHTO Load and Resistance Factor Design Specifications, this invaluable resource offers civil engineering students and practitioners a comprehensive introduction to the latest construction methods and materials in bridge design, including Accelerated Bridge Construction (ABC), Ultra-High Performance Concrete (UHPC), and Practical 3D Rigorous Analysis. This updated Fourth Edition offers:

• Dozens of end-of-chapter worked problems and design examples based on the latest AASHTO LRFD Specifications.
• Access to a Solutions Manual and multiple bridge plans including cast-in-place, precast concrete, and steel multi-span available on the Instructor’s companion website.

From gaining base knowledge of the AASHTO LRFD specifications to detailed guidance on highway bridge design, Design of Highway Bridges is the one-stop reference for civil engineering students and a key study resource for those seeking engineering licensure through the Principles and Practice of Engineering (PE) exam.