The Designer's Guide to the Cortex-M Processor Family: A Tutorial Approach - Softcover

Martin, Trevor

9780323854948: The Designer's Guide to the Cortex-M Processor Family: A Tutorial Approach

Softcover

ISBN 10: 032385494X ISBN 13: 9780323854948

Verlag: Newnes, 2022

Alle Exemplare dieser ISBN-Ausgabe

0 Gebraucht

4 Neu

Von EUR 69,42

The Designer’s Guide to the Cortex-M Microcontrollers, Third Edition provides an easy-to-understand introduction to the concepts required to develop programs in C with a Cortex-M based microcontroller. Sections cover architectural descriptions that are supported with practical examples, enabling readers to easily develop basic C programs to run on the Cortex-M0/M0+/M3 and M4 and M7 and examine advanced features of the Cortex architecture, such as memory protection, operating modes and dual stack operation. Final sections examine techniques for software testing and code reuse specific to Cortex-M microcontrollers. Users will learn the key differences between the Cortex-M0/M0+/M3 and M4 and M7; how to write C programs to run on Cortex-M based processors; how to make the best use of the CoreSight debug system; the Cortex-M operating modes and memory protection; advanced software techniques that can be used on Cortex-M microcontrollers, and much more.

Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.

�ber die Autorin bzw. den Autor

Trevor Martin graduated from Brunel University in 1988 with an Honors degree in electrical and electronics engineering. In the same year, he began work as a junior hardware engineer at Philips Medical Systems. He joined Hitex in 1992 as a technical specialist for 8-bit microcontroller development tools. This included the 8051,68HC11\05\08 microcontrollers. He also gained experience with networking protocols such as CAN, USB, and TCP/IP. Since 2000, he has been supporting ARM-based microcontrollers, initially ARM7 and ARM9 CPU then moving to Cortex-M processor. To promote these devices, he has worked closely with both NXP and ST and also TI and Freescale to a lesser extent. Since 2005, he has written a number of “Insider’s Guide� books that are introductory tutorials to ARM-based microcontroller families such as LPC2000, STR9, and STM32. He also runs regular training courses, a general Cortex Microcontroller workshop and also device-specific courses.

Von der hinteren Coverseite

The Designer’s Guide to the Cortex-M Microcontrollers gives you an easy-to-understand introduction to the concepts required to develop programs in C with a Cortex-M based microcontroller. The book begins with an overview of the Cortex-M family, giving architectural descriptions supported with practical examples, enabling you to easily develop basic C programs to run on the Cortex-M0/M0+/M3 and M4 and M7. It then examines the more advanced features of the Cortex architecture such as memory protection, operating modes, and dual stack operation.

Once a firm grounding in the Cortex-M processor has been established the book introduces the use of a small footprint RTOS and the CMSIS-DSP library. The book also examines techniques for software testing and code reuse specific to Cortex-M microcontrollers.

With this book you will learn: the key differences between the Cortex-M0/M0+/M3 and M4 and M7; how to write C programs to run on Cortex-M based processors; how to make the best use of the CoreSight debug system; the Cortex-M operating modes and memory protection; advanced software techniques that can be used on Cortex-M microcontrollers; how to use a Real Time Operating System with Cortex-M devices; how to optimize DSP code for the Cortex-M4; and how to build real time DSP systems.

��ber diesen Titel� kann sich auf eine andere Ausgabe dieses Titels beziehen.