Model-Based Engineering for Complex Electronic Systems - Hardcover

Über die Autorinnen und Autoren

Peter Wilson is Professor of Electronic Systems Engineering in the Electronic and Electrical Engineering Department at the University of Bath. After obtaining degrees at Heriot-Watt University in Edinburgh he worked as a Senior Design Engineer with Ferranti, Scotland and then as a Technical Specialist for Analogy, Inc. in Oregon, USA. After obtaining his PhD at the University of Southampton, he joined the faculty and was a member of the Academic staff at the University of Southampton from 2002 till 2015 when he moved to the University of Bath. He has published more than 100 papers and 3 books. Peter Wilson is also a Fellow of the IET, Fellow of the British Computer Society, a Chartered Engineer in the UK and a Senior Member of the IEEE.

Dr. H. Alan Mantooth is a Distinguished Professor of Electrical Engineering at the University of Arkansas (UA) and holder of the 21st Century Endowed Chair in Mixed-signal IC Design and CAD. After receiving his bachelor’s and master’s at the UA in 1985 and 1986, respectively, and his Ph.D. from Georgia Tech in 1990, he worked for Analogy, Inc. for eight years as a modeling engineer before returning to the UA. He has published over 200 refereed articles on IC design, CAD, modeling, and power electronics, holds three modeling software patents and has published two other books. He is a Fellow of the IEEE and a member of Tau Beta Pi and Eta Kappa Nu.

Von der hinteren Coverseite

In the Electronics industry today, consumer demand for devices with hyper-connectivity and mobility has resulted in the development of a complete system on a chip (SoC). Using the old rule of thumb design methods of the past is no longer feasible for these new complex electronic systems. To develop highly successful systems that meet the requirements and quality expectations of customers, engineers now need to use a rigorous, model-based approach in their designs. This book provides the definitive guide to the techniques, methods and technologies to carry out model- based electronic system design. Based on the authors considerable industrial experience, the book shows how to implement the methods in the context of integrated circuit design flows.

• Complete guide to methods, techniques and technologies of model-based engineering design for developing robust electronic systems
• Gives a toolbox of methods and models to choose from for the task at hand supported by numerous examples of how to put them into practice
• Shows how to adopt the methods using numerous industrial examples in the context of integrated circuit design

In the electronics industry today consumer demand for devices with hyper-connectivity and mobility has resulted in the development of a complete system on a chip (SoC). Using the old rule of thumb design methods of the past is no longer feasible for these new complex electronic systems. To develop highly successful systems that meet the requirements and quality expectations of customers, engineers now need to use a rigorous, model-based approach in their designs.

This book provides the definitive guide to the techniques, methods and technologies for electronic systems engineers, embedded systems engineers, and hardware and software engineers to carry out model- based electronic system design, as well as for students of IC systems design. Based on the authors considerable industrial experience, the book shows how to implement the methods in the context of integrated circuit design flows.